Serving the Fort Wayne area  ·  (260) 238-9399  ·  Open Mon-Sun 7am-7pm
📞 (260) 238-9399 Free Quote

Metal Roofing in Kendallville, IN (46755) · Local Professionals

Fort Wayne Metal Roofing · Fast response in Kendallville and the Fort Wayne area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Kendallville is farm country with a metal roof on every other barn and plenty of older homes that have seen a few hailstorms. If you live near Main Street or out by Bixler Lake, you know the sound of spring storms rolling in across the flat fields.

We are Fort Wayne Metal Roofing, and since 2009 we have been fixing and installing metal roofs for homeowners and property managers right here in Kendallville (46755) and the surrounding areas. Whether it is a bank barn on the edge of town or a ranch house in a quiet neighborhood, we know the local conditions that wear a roof down.

Metal Roofing in Kendallville (46755)

Kendallville sits on flat glacial farmland, and that means two things for roofs: wind has nothing to slow it down, and water tends to pool rather than run off. The older bank barns and farmhouses around town often have corrugated or ribbed panel roofs that have been patched a dozen times. Those panels are tough, but after years of freeze-thaw cycles and summer hail, the fasteners back out and the seams start to lift. On residential streets, we see a mix of post-war ranches and two-story homes where the original roof is nearing the end of its life. We handle everything from a simple screw replacement to a full standing seam installation. Our crews are insured and we treat every property like it is our own.

We have been serving Kendallville and the greater Fort Wayne area since 2009, and we are a Metal Roofing Alliance member. That means we stay current on the best practices for metal roofing in this climate.

Our services in Kendallville

How a Job Works in Kendallville

Step 1: You call us at (260) 238-9399 or fill out our contact form. We schedule a free on-site assessment at a time that works for you. We will walk the roof, check the fasteners and seams, and look for any signs of leaks or storm damage. Then we give you a written estimate with options.

Step 2: Once you approve the estimate, we schedule the work. For a full replacement, we pull the necessary permits from the local building department. If your home is in a historic district or has an HOA, we help you navigate the approval process. Our crews are careful with tight lot access and protect your landscaping. We work efficiently to get the job done right.

Step 3: After the work is complete, we do a thorough cleanup, haul away all debris, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next storm.

Pricing for metal roofing in Kendallville depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening starts at $750. We also offer free estimates for storm damage inspections. Call us at (260) 238-9399 to get a precise quote for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Kendallville and nearby areas.

My barn near the Noble County line has an old corrugated metal roof with leaking fasteners. Can you fix it without replacing the whole roof?
Yes, we often repair corrugated and ribbed panel roofs by replacing the failed fasteners and sealing the seams. If the panels are still solid, a screw replacement and re-fastening job can extend the life of your barn roof for years. We will inspect the roof and give you an honest recommendation.
A storm just blew through Kendallville and lifted some panels on my roof. How quickly can you respond?
We offer free storm damage inspections and prioritize emergency repairs. Call us at (260) 238-9399 and we will schedule a visit as soon as possible to secure your roof and prevent further damage.
What is the typical cost for a metal roof on a ranch-style home in Kendallville?
For a typical ranch home, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while a standing seam roof starts at $10 per square foot. The total cost depends on the roof size, pitch, and any necessary repairs to the decking. We provide free estimates so you can get an accurate number.
Do I need a permit to replace my roof in Kendallville?
Yes, roofing permits are commonly required for a full replacement or re-roof. The rules and fees vary, so it is best to check with the City of Kendallville website or the local building department for the most current requirements. We can help you navigate the permitting process.
My neighbor's tree branches hang over my roof. Can I trim them, and do I need my HOA's approval for a metal roof?
You generally have the right to trim branches that overhang your property line, but it is wise to check local ordinances first. For HOA approval, many associations have design guidelines for roof materials and colors. We can provide product samples and documentation to help you get approval.
Are you fully insured for roofing work in Kendallville?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. This protects you and your property in case of an accident. We are happy to provide proof of insurance upon request.
What should I do to maintain my metal roof in Kendallville's climate?
Inspect your roof after major storms for loose fasteners or damaged panels. Keep gutters clear of debris, and trim overhanging branches. If you notice any leaks or signs of wear, call us for a free inspection. Regular maintenance can extend the life of your metal roof.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fort Wayne

All your work handled by qualified professionals in Fort Wayne

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Fort Wayne

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fort Wayne · Response within 24h · No commitment · ☎ (260) 238-9399

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fort Wayne ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm